Обновление MikroTik RouterOS v6.42.2

Производитель MikroTik обновил операционную систему RouterOS до версии 6.42.2.

Прошивку RouterOS версии 6.42.2 можно скачать с сайта http://www.mikrotik.com/download.html

В версии 6.42.2 сделаны следующие улучшения и исправления (17 мая 2018 г.):

• bridge - do not allow to add same interface list to bridge more than once;
• bridge - fixed LLDP packet receiving;
• bridge - fixed processing of fragmented packets when hardware offloading is enabled;
• console - fixed type "on" and "wireless-status" LED trigger value setting (introduced in v6.42.1);
• crs317 - fixed link flapping when inserted S+RJ10 module without any cable;
• defconf - fixed wAP LTE kit default configuration;
• dhcpv4 - prevent sending out ICMP port unreachable packets;
• dhcpv4-client - fixed DHCP client stuck in renewing state;
• dhcpv6-relay - fixed missing configuration after reboot;
• filesystem - fixed NAND memory going into read-only mode;
• hotspot - fixed user authentication when queue from old session is not removed yet;
• interface - fixed "built-in=no" parameter for manually created interface lists;
• interface - fixed "dynamic" built-in interface list behaviour;
• interface - fixed interface list which include disabled member;
• interface - fixed interface list which include/exclude another list;
• interface - fixed interface configuration responsiveness;
• ipsec - fixed policies becoming invalid if added after a disabled policy;
• ipsec - improved reliability on IPsec hardware encryption for ARM devices except RB1100Dx4;
• led - added "dark-mode" functionality for hAP ac and hAP ac^2 devices;
• lte - improved LTE communication process on MMIPS platform devices;
• quickset - fixed dual radio mode detection process;
• routerboard - properly represent board name for hAP ac^2;
• tile - fixed Ethernet interfaces becoming unresponsive;
• winbox - allow to specify "any" as wireless "access-list" interface;
• winbox - fixed "/ip dhcp-server network set dns-none" parameter;
• wireless - enable all chains by default on devices without external antennas after configuration reset;
• wireless - fixed packet processing when "static-algo-0=40bit-wep" is being used (introduced in v6.42);
• wireless - fixed usage of allowed signal strength values received from RADIUS;
• wireless - improved wireless throughput on hAP ac^2 and cAP ac;
• x86 - fixed reboot caused by MAC Winbox connection.