Продукция
 
Производители
 
Новости
 
Статьи

Обновление MikroTik RouterOS v6.48.2

12.04.2021

Производитель MikroTik обновил операционную систему RouterOS до версии 6.48.2.

Прошивку RouterOS версии 6.48.2 можно скачать с сайта http://www.mikrotik.com/download.html

В версии 6.48.2 сделаны следующие улучшения и исправления (9 апреля 2021 г.):

  • bonding - improved system stability when disabling/enabling bonding ports;
  • bridge - improved bridge stability when host changes port (introduced in v6.47);
  • console - require "write+ftp" permissions for exporting configuration to file;
  • console - updated copyright notice;
  • crs3xx - added "/system swos" menu for CRS354 devices, should only be used after SwOS 2.13 release;
  • crs3xx - fixed interface LEDs for QSFP+ and SFP+ interfaces on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
  • crs3xx - fixed packet transmit in 5Gbps link rate for CRS312 device;
  • crs3xx - improved 1Gbps Ethernet port group traffic forwarding for CRS354 devices;
  • dhcp - fixed link state checking for DHCP client;
  • ethernet - fixed cable-test for some devices (e.g. RB2011, RB951G-2HnD);
  • ethernet - improved system stability when receiving large VLAN tagged packets on IPQ4018/IPQ4019 devices;
  • fastpath - fixed IP packet receive on bridge and bonding interfaces when destination MAC address match with slave port MAC;
  • health - fixed voltage monitor on BaseBox5 devices;
  • ike2 - added "MS-CHAP-Domain" attribute to RADIUS requests;
  • ike2 - fixed DH group negotiation with EAP;
  • ike2 - fixed EAP MSK length validation (introduced in v6.48);
  • ike2 - fixed initial traffic selector's protocol and port in transport mode;
  • ipv6 - improved system stability when parsing IPv6 options;
  • lora - added additional predefined network servers;
  • lora - added option to hide CRC error messages in monitor;
  • lora - improved downlink transmission;
  • ospf - fixed type-7 LSA translation to type-5;
  • ovpn - fixed route cache entry leak when establishing a new session;
  • poe - do not perform PoE firmware upgrade procedure on RB960 and OmniTik devices without PoE out;
  • ppp - do not fail "at-chat" command when issued on disabled PPP interface;
  • ptp - improved management service stability when receiving bogus packets;
  • quickset - prefer 5GHz interface for WiFi scan in CPE mode;
  • rb3011 - improved system stability when changing RouterBOARD settings (introduced in v6.48);
  • snmp - fixed SNMP trap agent address;
  • supout - fixed "topic" column presence in "Log" section;
  • switch - improved resource allocation on 98PX1012 switch chip for CCR2004-1G-12S+2XS device;
  • switch - improved system stability with 98PX1012 switch chip for CCR2004-1G-12S+2XS device;
  • telnet - do not send options if connecting to non standard port;
  • telnet - fixed server when run on non standard port;
  • tr069-client - improved management service stability when receiving bogus packets;
  • upgrade - fixed upgrade procedure on 16MB devices;
  • upgrade - improved "long-term" upgrade procedure on SMIPS devices;
  • user - fixed "skin" configuration for user groups (introduced in v6.48);
  • webfig - allow to specify "prefix" parameter under "IPv6/ND/Prefixes" menu;
  • webfig - do not corrupt settings when starting "Wireless Sniffer";
  • webfig - do not move top right menu in opposite direction when scrolling horizontally;
  • webfig - do not show newly created SMB shares as invalid;
  • webfig - fixed new interface addition;
  • webfig - show "Interfaces" menu by default after logging in;
  • webfig - show "network-mode" for LTE modems that support it;
  • winbox - added "Channel" parameter under "System/Console" menu;
  • winbox - do not show empty "CPU Frequency" parameter under "System/Resources" menu;
  • winbox - fixed "reachable-time" value unit under "IPv6/ND" menu;
  • winbox - fixed QCA-8511 switch chip type reporting under "Switch/Settings" menu;
  • winbox - fixed duplicate "Trusted" setting under "Interface/Bridge/Ports" menu;
  • winbox - hide "Allow Roaming" parameter on LTE modems that do not support it;
  • winbox - increased "target" field limit to 128 under "Queues" menu;
  • winbox - renamed IP protocol 41 to "ipv6-encap";
  • winbox - show "LCD" only on boards that have LCD;
  • winbox - show "System/Health" only on boards that have health monitoring;
  • winbox - show "activity" column by default under "IP/Kid Control/Devices" menu.
Компания ТехноТрейд, тел.: +38(057) 764-02-54
Печатная версия Поделитесь новостью:
  • Обычная форма
  • Facebook

Комментарии


Добавить отзыв
Ваше Имя: *
Ваш e-mail:  

Отзыв: *
Оценка:  
Введите символы: *
Обновить
 
Магазин
Техподдержка
Наши партнеры
   
© 2003–2021 «Компания ТехноТрейд»
интернет-магазин сетевого оборудования
×
×
Валюта: